T3 Tech help - Torque measurement for JX manifold.

Print Page | Close Window

Torque measurement for JX manifold.

Printed From: The Brick-yard
Category: T3 Section
Forum Name: T3 Tech help
Forum Description: Forum for T3 specific problems.
URL: http://www.brick-yard.co.uk/forum/forum_posts.asp?TID=94140
Printed Date: 19 Apr 24 at 21:41
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com

Topic: Torque measurement for JX manifold.

Posted By: rob1927
Subject: Torque measurement for JX manifold.
Date Posted: 10 Jul 19 at 15:26

Hello, could anyone advise me the correct torque measurement for the manifold studs(fitted to cylinder head)on my 1.6TD? And also once the studs are in, what is the correct torque for the nuts that secure the manifold to the cylinder head?

Many thanks,

Rob.

Replies:

Posted By: clift_d
Date Posted: 10 Jul 19 at 15:59

25Nm for the nuts to both manifolds - I've also left a response to your Club8090 post. Drop me a PM if you want a link to download PDFs of the Workshop Manuals.

-------------
1988 1.6TD Westfalia Club Joker syncro

Posted By: rob1927
Date Posted: 11 Jul 19 at 06:23

Cheers!

Posted By: Chappy
Date Posted: 17 Jul 19 at 23:00

Don't forget the special washers too - imperative that they're installed!

https://www.brickwerks.co.uk/t3-parts/engine/diesel-cs-ky-jx/exhaust-system/mountings-and-hardware/exhaust-manifold-washer-t3-t4-lt.html" rel="nofollow - https://www.brickwerks.co.uk/t3-parts/engine/diesel-cs-ky-jx/exhaust-system/mountings-and-hardware/exhaust-manifold-washer-t3-t4-lt.html

-------------
Back in the slow lane, yeah!