T3 Tech help - rad fan

Print Page | Close Window

rad fan

Printed From: The Brick-yard
Category: T3 Section
Forum Name: T3 Tech help
Forum Description: Forum for T3 specific problems.
URL: http://www.brick-yard.co.uk/forum/forum_posts.asp?TID=93642
Printed Date: 19 Apr 24 at 13:20
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com

Topic: rad fan

Posted By: southern scouse
Subject: rad fan
Date Posted: 08 Aug 18 at 19:22

hi my rad fan will not run pulled plug off sensor bridge 2 wires nothing put a meter on contacts and have12v pulled plug off fan connected 12v supply fan works

on reading other posts if when you bridge the wires and fan works its the sensor mine will not fuse is ok any other ideas thanks

-------------
tomjacbus

Replies:

Posted By: msabbasi
Date Posted: 13 Aug 18 at 17:08

Look for a 12V supply on either of the two wires of the sensor plug. You should see a constant 12V signal. If not, then you need to trace back to the fuse box or relay panel located on the left side under the dash and find the reason for no 12V supply at the sensor plug.