Print Page | Close Window

RH ZW1s - 8 x 17 ET53

Printed From: The Brick-yard
Category: T3 Section
Forum Name: T3 Wheel help
Forum Description: The most common question that pops up on these forums is what wheels fit and what do I need to get them on!
URL: http://www.brick-yard.co.uk/forum/forum_posts.asp?TID=89077
Printed Date: 28 Mar 24 at 09:09
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com


Topic: RH ZW1s - 8 x 17 ET53
Posted By: GavB95
Subject: RH ZW1s - 8 x 17 ET53
Date Posted: 25 Mar 15 at 20:21
I've been offered a decent set of RH ZW1s in 8x17 with et53.

I know that a few people have ran these wheels on T3s and that RH spacers are required but will these work or am I best to look for lower offset wheels to avoid the 30+mm spacer these would need?

Anyone out there running ZW1s?

-------------
Bluestar T3 running AAZ/flipped box



Replies:
Posted By: Tee3
Date Posted: 25 Mar 15 at 21:29
The thing with ZW1s is that they are designed to work with a spacer.
They have a raised area lip on the inside that locates on the outside of the spacer.
So you really need to run a spacer or adapter of the correct diameter...
I run 9" rears and 8" fronts and I had to have the rear spacers machined to sit properly

If theyre cheap enough to budget getting some spacers then you should be able to fit them, but mine were a "cheap" set, and it cost me a fortune to get mine on and sitting right

Just having the colour coded now, and them I have them to rebuild with new lips on the front...

http://s36.photobucket.com/user/tee3T3/media/DSC_0100_zpss5vzrtbm.jpg.html" rel="nofollow">


-------------

YOU CANT EDUCATE GAMMON

http://www.tee3.co.uk/" rel="nofollow - http://www.tee3.co.uk/


Posted By: GavB95
Date Posted: 25 Mar 15 at 21:43
Very nice! I had a search and had seen a post on here from a few years back where you'd advertised your van and mentioned the zw1s. I wasn't too sure if you still had them.

What et are yours without the spacers and what width spacers did you use? I'd have to stick to 8s all round till budget allowed a rebuild on the rear.



-------------
Bluestar T3 running AAZ/flipped box


Posted By: GavB95
Date Posted: 27 Mar 15 at 12:42
Done the maths and there's a good reason that the set I'd been offered were cheap! I'll be sticking the Carats back on for now.

Should've known really, I've built a set of BBS splits for the mk1 that ended up costing a small fortune. 


-------------
Bluestar T3 running AAZ/flipped box


Posted By: Tee3
Date Posted: 31 Mar 15 at 23:51
ET... honestly cant remember now. They fit.
I think the details are on here somewhere.

Yeah... expensive business this wheel malarky. There are very few cheap wheels when it comes to putting them on a T3



-------------

YOU CANT EDUCATE GAMMON

http://www.tee3.co.uk/" rel="nofollow - http://www.tee3.co.uk/


Posted By: Bromy
Date Posted: 01 Apr 15 at 06:35
Originally posted by Tee3 Tee3 wrote:

The thing with ZW1s is that they are designed to work with a spacer.
They have a raised area lip on the inside that locates on the outside of the spacer.
So you really need to run a spacer or adapter of the correct diameter...
I run 9" rears and 8" fronts and I had to have the rear spacers machined to sit properly

If theyre cheap enough to budget getting some spacers then you should be able to fit them, but mine were a "cheap" set, and it cost me a fortune to get mine on and sitting right

Just having the colour coded now, and them I have them to rebuild with new lips on the front...

http://s36.photobucket.com/user/tee3T3/media/DSC_0100_zpss5vzrtbm.jpg.html" rel="nofollow">

Looks bob on colour coded Thumbs Up


-------------
"follow the masses, do the opposite"



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.06 - https://www.webwizforums.com
Copyright ©2001-2023 Web Wiz Ltd. - https://www.webwiz.net