T3 Wheel help - advice: RH Cups 16"

Print Page | Close Window

advice: RH Cups 16"

Printed From: The Brick-yard
Category: T3 Section
Forum Name: T3 Wheel help
Forum Description: The most common question that pops up on these forums is what wheels fit and what do I need to get them on!
URL: http://www.brick-yard.co.uk/forum/forum_posts.asp?TID=86935
Printed Date: 19 Apr 24 at 22:15
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com

Topic: advice: RH Cups 16"

Posted By: ob1
Subject: advice: RH Cups 16"
Date Posted: 13 Nov 14 at 09:57

Ok got a set of RH Cups 16" 8J 55 Offset... Going to put tall rubber on them for gearing - 205 / 70 / 16

Now I want em on the van. Centre bore is small ish.... so have been contemplating Baxter's 25mm spacers....

on the front and rear....

http://www.brickwerks.co.uk/index.php/t3-parts/t3-tuning/brickwerks-t3-wheel-spacer-25mm.html" rel="nofollow - http://www.brickwerks.co.uk/index.php/t3-parts/t3-tuning/brickwerks-t3-wheel-spacer-25mm.html

now i presume this will sort the front hub clearence and sort the offset front and rear...

it a rather expensive solution but i need 25mm of spacer and that's very long studs at the back...

thoughts...

Replies:

Posted By: ob1
Date Posted: 18 Nov 14 at 10:04

Don't wish to offend the powers that be! But what about these badboys? Cheaper but will they do the same job?

http://www.vw-t3-bus-shop.de/en/spurverbreiterung-30mm-pro-rad" rel="nofollow - http://www.vw-t3-bus-shop.de/en/spurverbreiterung-30mm-pro-rad

I've emailed the shop to see if the studs are suited to alloy wheels?