Print Page | Close Window

Will T3 seat fit in LT31 Y reg 1982?

Printed From: The Brick-yard
Category: LT, Crafter & Sprinter Section
Forum Name: LT, Crafter & Sprinter Tech
Forum Description: All LT, Crafter & Sprinter tech related stuff in here
URL: http://www.brick-yard.co.uk/forum/forum_posts.asp?TID=55020
Printed Date: 28 Mar 24 at 19:18
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com


Topic: Will T3 seat fit in LT31 Y reg 1982?
Posted By: Tazz-man
Subject: Will T3 seat fit in LT31 Y reg 1982?
Date Posted: 26 Jun 10 at 16:33
T3 seats will they fit into LT 31 y reg 1982?

-------------
Tazz-man VW LT 31, 1981-82, Y Reg, HighTop Homebuilt Camper



Replies:
Posted By: gusbang
Date Posted: 28 Jun 10 at 18:52
YesThumbs Up

-------------
T3 Doka 2.1MV


Posted By: Tazz-man
Date Posted: 28 Jun 10 at 18:57
Well no not really, I picked up T3 seats today. The passager seat went straight in but drivers seat is about 2 inches out, on the runners. but you can move the runner on the cab floor and adjust, I hope.

-------------
Tazz-man VW LT 31, 1981-82, Y Reg, HighTop Homebuilt Camper


Posted By: icky
Date Posted: 30 Jun 10 at 23:57
Yeah, I was just gonna post that; the drivers' side seat on the LT is a little bit narrower than a T3 because of the engine.
 
To be honest - I ran mine for 6 months with just the door-side runner in and the other side resting on the engine; and then finally modded the seat base by moving the runner.


-------------
Engine cranes = the ultimate tool to test the tensile strength of Everything you didn't disconnect!

- 2000 MK4 Golf GT TDi
- 1994 LT Panel Van
- 1997 LT Minibus
- 1984 Volvo/VanHool Alizee


Posted By: Tazz-man
Date Posted: 01 Jul 10 at 05:42
Thumbs UpLOL that is exactly what I'm doing! It just looks like the runner has to be on the other side of the seat base. I'm going to cut off and put on other side asap. Thanks

-------------
Tazz-man VW LT 31, 1981-82, Y Reg, HighTop Homebuilt Camper


Posted By: icky
Date Posted: 01 Jul 10 at 22:19

I fitted captains seats (with armrests) to mine - so I left the outer (door side) runner in the same place and modded the inside (engine side) one to suit; I could have moved the outer one, but that would have lead to clearance issues between the armrest and the door!



-------------
Engine cranes = the ultimate tool to test the tensile strength of Everything you didn't disconnect!

- 2000 MK4 Golf GT TDi
- 1994 LT Panel Van
- 1997 LT Minibus
- 1984 Volvo/VanHool Alizee



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.06 - https://www.webwizforums.com
Copyright ©2001-2023 Web Wiz Ltd. - https://www.webwiz.net