LT, Crafter & Sprinter Tech - Master cylinder source?

Print Page | Close Window

Master cylinder source?

Printed From: The Brick-yard
Category: LT, Crafter & Sprinter Section
Forum Name: LT, Crafter & Sprinter Tech
Forum Description: All LT, Crafter & Sprinter tech related stuff in here
URL: http://www.brick-yard.co.uk/forum/forum_posts.asp?TID=42756
Printed Date: 19 Apr 24 at 12:22
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com

Topic: Master cylinder source?

Posted By: markpark
Subject: Master cylinder source?
Date Posted: 19 Aug 09 at 20:57

Hi Guys,

Need a new master cylinder for my LT. Fitted new Vag calipers this afternoon as the bleed nipples sheared on the old one.

Got a really good pedal after bleeding. By the end of the first road on the test drive, no pedal without pumping. Getting a lot of pedal creep as well. Will go to the floor in about 5 seconds.

Bled the oil fluid through and put in new. No leaks. Am confident have got all the air out. Pretty sure is knackered master cylinder because of the pedal creep.

Anybody know a source of a replacement? Its an '89 LT28 2.4 TD btw.

-------------
DJ T3 homrbrew camper and 98 LT 2.5 TDI crew van

Replies:

Posted By: Baxter
Date Posted: 19 Aug 09 at 21:04

Give us a day or two.

Posted By: markpark
Date Posted: 19 Aug 09 at 21:08

Okay will do.

-------------
DJ T3 homrbrew camper and 98 LT 2.5 TDI crew van