audi quattro turbo 17" wheels ,advice ple
Printed From: The Brick-yard
Category: T3 Section
Forum Name: T3 Wheel help
Forum Description: The most common question that pops up on these forums is what wheels fit and what do I need to get them on!
URL: http://www.brick-yard.co.uk/forum/forum_posts.asp?TID=15375
Printed Date: 19 Apr 24 at 15:43
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com
Topic: audi quattro turbo 17" wheels ,advice ple
Posted By: alldub
Subject: audi quattro turbo 17" wheels ,advice ple
Date Posted: 02 May 07 at 12:50
|
I am going to use a set of 17" alloys from an audi A4 quattro turbo , they are et 45 and 8x17, i am going to need the centre bore enlarging , can i a, just open it out with a grinder attachment ?, b, get it machined/drilled so that it stays hubcentric ? (if so what is the proper size ? 64 -or 66mm ?) and is the centre bore the same for the rears as the fronts ? i have longer studs and bolts ready to go just need this centre bore info, cheers for any help  ------------- got your number off the bathroom wall |
Replies:
Posted By: DeeDub
Date Posted: 02 May 07 at 22:56
|
Hi alldub, take front wheels to machine shop,bore out to 66mm.im sure you will require spacers on front to clear upper wishbone.rear centre bore should be ok but to keep centre caps you will need spacers as well.this will even things up as well and fill the rear arches better. ive got audi 7x17 et45 front and 8x17 et35 rear.anymore info required pm me. ------------- Dave |