T3 Autosleeper low top - the return! |
Post Reply | Page <1 345 |
Author | |
club joker 84
Groupie Joined: 21 Jul 09 Location: Cornwall Status: Offline Points: 138 |
Post Options
Thanks(0)
|
Good work on the speed sensor . Glad to hear it is working for you!
Ben
|
|
fufflenarnia
Vanorak #1 Cable Shift Bitch Joined: 04 Sep 10 Location: Redhill, Surrey Status: Offline Points: 1362 |
Post Options
Thanks(0)
|
Yes, many thanks for that.
|
|
fufflenarnia
Vanorak #1 Cable Shift Bitch Joined: 04 Sep 10 Location: Redhill, Surrey Status: Offline Points: 1362 |
Post Options
Thanks(0)
|
Had a weekend with vcds, initially trying to fix the hall sensor and other error codes but made them worse.
Wouldn't even run properly. After a bit of head scratching I suspected the engine multiplug, it had been damaged by the guys who rem9ved the engine. A good spray with Wurth Contact ol sorted it and error codes came up as: The maff is shit so that's unplugged hence the code, new one on order. Also a pleasant surprise: Now I need to work out how to use that to the best effect... Edited by fufflenarnia - 02 Jul 17 at 21:32 |
|
rowlesy
Vanorak murdered the murderwagen Joined: 09 Oct 05 Location: up unit! Status: Offline Points: 6466 |
Post Options
Thanks(0)
|
ooh its you on faceache! that is a nice surprise........ (cam) i take it they couldnt figure out how to get the plug off so resorted to molegrips to get it off? have you got earths to engine? one at t68 to end of cylinder head around water outlet one off coil to rocker-cover and another (for good measure) from earth point on block to chassis or battery? to have that many faults in one hit i would say an earth or two is missing or very poor connection.
|
|
UberFukz broke another! sucky sucky five dollah!
always out numbered never out gunned! RWS welding 07846 380 467 (worcs) |
|
fufflenarnia
Vanorak #1 Cable Shift Bitch Joined: 04 Sep 10 Location: Redhill, Surrey Status: Offline Points: 1362 |
Post Options
Thanks(0)
|
Yup, twas me.
The second shot of vcds was wrong above, now updated. Yes, it's well earthed. The earth leads were fitted before the fuel pipes! It is all down to the multi plug, they ripped the cable out of the lambda sensor too. I though getting them to remove it would save me the effort - how wrong can you be! The cam looks like it could be fun: Solid line is standard cam, dotted line is 272 cam. Torque and bhp Edited by fufflenarnia - 02 Jul 17 at 21:34 |
|
rowlesy
Vanorak murdered the murderwagen Joined: 09 Oct 05 Location: up unit! Status: Offline Points: 6466 |
Post Options
Thanks(0)
|
you can suffer lumpy tick over but hey power comes at a price!
|
|
UberFukz broke another! sucky sucky five dollah!
always out numbered never out gunned! RWS welding 07846 380 467 (worcs) |
|
fufflenarnia
Vanorak #1 Cable Shift Bitch Joined: 04 Sep 10 Location: Redhill, Surrey Status: Offline Points: 1362 |
Post Options
Thanks(0)
|
I didn't even notice when I bought the engine, it's not lumpy at all. I guess the penalty will come with the mpg,
From the drives I've had in it, there is a power band in higher revs, but it was cutting at 5k, so I couldn't make the most of them, there was still plenty of low torque. |
|
Post Reply | Page <1 345 |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |