New Project, 1Z TDI install. |
Post Reply | Page <1 567 |
Author | |
VW Nerd
Yardie Joined: 20 Jan 08 Location: Bristol Status: Offline Points: 831 |
Post Options
Thanks(0)
|
This is the set up that I run at the moment for my gear linkage on the gear stick end, which gives me all the gears in the correct order and also a lockout for reverse gear.
Although the UN1 is a 5 speed gear box I used the 4 speed gear stick arrangement from the VW T3 as this gave the best results with the gear shift pattern on the UN1 (namely reverse along side of second and 5th along side of 3rd) I hope to build a cable linkage kit to see if this gives any improvement over the shift rod set up. Edited by VW Nerd - 15 Oct 11 at 10:44 |
|
Developing parts for the VW T3 TDI market Inc flipped audi gearbox install parts.
Tim Shettle www.ultimate-engineering.co.uk Bristol Tel/txt 07810 320 464 AFN TDI Panel Van |
|
VW Nerd
Yardie Joined: 20 Jan 08 Location: Bristol Status: Offline Points: 831 |
Post Options
Thanks(0)
|
I have added little rubber boots onto my rear gear linkage rose joint as there are some signs of wear caused by road grim flying about and sticking to the moving parts of my gear linkage and grinding it down.
|
|
Developing parts for the VW T3 TDI market Inc flipped audi gearbox install parts.
Tim Shettle www.ultimate-engineering.co.uk Bristol Tel/txt 07810 320 464 AFN TDI Panel Van |
|
Pecha
Not Quite Newbie Joined: 11 Feb 16 Location: Latvia Status: Offline Points: 12 |
Post Options
Thanks(0)
|
Thank you for idea. Works perfectly on my UN1- just will have to modify guard box under the shifter- otherwise I cant shift in 5th and reverse.
Thank you! Edited by Pecha - 26 Sep 16 at 09:46 |
|
www.vwt3.lv
mr.janis.petersons@gmail.com VW T3, 2.0 ADY + UN1 |
|
VW Nerd
Yardie Joined: 20 Jan 08 Location: Bristol Status: Offline Points: 831 |
Post Options
Thanks(0)
|
Nice work. I would suggest that you fit either the rubber boots over the rose joints or apply a heavy coating of grease to keep the road spray and dust sticking to your linkage which in time will cause stiffness.
Tim.
|
|
Developing parts for the VW T3 TDI market Inc flipped audi gearbox install parts.
Tim Shettle www.ultimate-engineering.co.uk Bristol Tel/txt 07810 320 464 AFN TDI Panel Van |
|
Pecha
Not Quite Newbie Joined: 11 Feb 16 Location: Latvia Status: Offline Points: 12 |
Post Options
Thanks(0)
|
Are these specific rubber parts that are used for joint like that or you used
something "stock" and modified to fit?
Edited by Pecha - 26 Sep 16 at 12:11 |
|
www.vwt3.lv
mr.janis.petersons@gmail.com VW T3, 2.0 ADY + UN1 |
|
VW Nerd
Yardie Joined: 20 Jan 08 Location: Bristol Status: Offline Points: 831 |
Post Options
Thanks(0)
|
These are proper rubber boots for the joints. Ask your supplier if they sell them.
|
|
Developing parts for the VW T3 TDI market Inc flipped audi gearbox install parts.
Tim Shettle www.ultimate-engineering.co.uk Bristol Tel/txt 07810 320 464 AFN TDI Panel Van |
|
Pecha
Not Quite Newbie Joined: 11 Feb 16 Location: Latvia Status: Offline Points: 12 |
Post Options
Thanks(0)
|
Thanks mate!
Much appreciated
|
|
www.vwt3.lv
mr.janis.petersons@gmail.com VW T3, 2.0 ADY + UN1 |
|
Post Reply | Page <1 567 |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |