T5 Wheels onto T3 |
Post Reply | Page 12> |
Author | |
booted
Vanorak Joined: 13 May 07 Location: Luton Status: Offline Points: 2671 |
Post Options
Thanks(0)
Posted: 08 Feb 18 at 16:48 |
how wide are the T5 wheels [not the tyre]
the CB of the Adaptor and the wheel will need to be 66.6mm if your wheels are 8x16 you will need and offset of around 25 or less or the inner edge of the wheel will foul the top wishbone its impossible to give you a definitive answer the only way to be sure is to offer your wheels up to your van and do some measuring and calculations even the camber setting on your van could affect whether they will go on or not. there is also a surprising amount of variance between tyre sizes . [ the same size tyre from different manufacturers does not have the same dimensions my crewcab had 8x16 et35 wheels with 215/55x16 tyres and a 10mm spacer giving an effective et of 25. all 4 wheels had the same size tyres 2 were Dunlop 2 were Pirelli the Pirellis fitted with about 5 mm of clearance . the dunlops wouldn't go on they fouled the wishbone |
|
Bromy
Vanorak Joined: 26 Feb 12 Location: Cambridge Status: Offline Points: 1303 |
Post Options
Thanks(0)
|
Upload some pics of the wheels, any stampings etc
|
|
"follow the masses, do the opposite"
|
|
arbor-aero
Not Quite Newbie Joined: 10 Oct 12 Location: Wales Status: Offline Points: 37 |
Post Options
Thanks(0)
|
Thank you DA,
After LOOKING Again the links just go to a generic Brick-yard web page with no links to spacers or the like? The Link on here for wheel alinement means nothing to me, so i must be a thick as my ex-wife stated. ut thanks for your help. x |
|
I'm getting there
|
|
Titus A Duxass
Vanorak Joined: 12 Feb 08 Location: Lossatal, Germ. Status: Offline Points: 2164 |
Post Options
Thanks(0)
|
Go to the Help & Support page on the Brickwerks website - https://www.brickwerks.co.uk/support/
On there you will find a thread called Wheel Fitting Help (https://www.brickwerks.co.uk/wheel-fitting/) And on here there is also a massive sub forum called T3 Wheel Help - http://www.brick-yard.co.uk/forum/t3-wheel-help_forum20.html Read those and you will probably find all the info that you need. It is right there in front of you if you LOOK.
|
|
Bollocks to it all!!
51°24′N 12°52′E |
|
arbor-aero
Not Quite Newbie Joined: 10 Oct 12 Location: Wales Status: Offline Points: 37 |
Post Options
Thanks(0)
|
We could get reaching climax soon.
And where is the clearance and how would I detect it?
|
|
I'm getting there
|
|
Titus A Duxass
Vanorak Joined: 12 Feb 08 Location: Lossatal, Germ. Status: Offline Points: 2164 |
Post Options
Thanks(0)
|
Yes.
But as always it's not as simple as that. 20mm is the theoretical but.......you need to assess the clearance before buying the spacers. |
|
Bollocks to it all!!
51°24′N 12°52′E |
|
arbor-aero
Not Quite Newbie Joined: 10 Oct 12 Location: Wales Status: Offline Points: 37 |
Post Options
Thanks(0)
|
Thats explaied alot thanks TD.
So, if the T3 is ET30 and i have ET50 wheels! The difference is 20mm. Dose this mean I need spacers of 20mm? |
|
I'm getting there
|
|
Titus A Duxass
Vanorak Joined: 12 Feb 08 Location: Lossatal, Germ. Status: Offline Points: 2164 |
Post Options
Thanks(0)
|
Taken from the Wheeling fitting page
On a T3 you want to achieve an ET of around 30 to 36 ish. Standard wheels drop within this range. The rear isn't usually a problem but the front is. If you dip below 30 then the further away you get the heavier your steering will become, the more likely it will be to "tram-line" meaning the van doesn't want to do anything other than go in straight lines and the inside of the tyres will scrub. Dipping below 30 a little won't really matter too much but when you get down to say ET23 then weird things happen. See fig 1.
|
|
Bollocks to it all!!
51°24′N 12°52′E |
|
BeJay
Vanorak Joined: 03 Jun 09 Location: Leicester Status: Offline Points: 1325 |
Post Options
Thanks(0)
|
I think the standard offset on a T3 is ET30 but double check before you order any spacers/PCD converters.
|
|
NIL ILLIGITIMUS CARBORUNDUM
|
|
arbor-aero
Not Quite Newbie Joined: 10 Oct 12 Location: Wales Status: Offline Points: 37 |
Post Options
Thanks(0)
|
Thanks Bj for that link.
I'm still confused Whats the offset of the T3 require? |
|
I'm getting there
|
|
BeJay
Vanorak Joined: 03 Jun 09 Location: Leicester Status: Offline Points: 1325 |
Post Options
Thanks(0)
|
arbor-aero have a look at THIS
|
|
NIL ILLIGITIMUS CARBORUNDUM
|
|
arbor-aero
Not Quite Newbie Joined: 10 Oct 12 Location: Wales Status: Offline Points: 37 |
Post Options
Thanks(0)
|
The ET is either 51 or 40, theres a number either side of the ET. TH 51 is to the rim side of the ET. The centre bore is 64mm.
The link you gave linked me to the basic t3 items listing on Brickwerks and there no adaptors?
|
|
I'm getting there
|
|
Titus A Duxass
Vanorak Joined: 12 Feb 08 Location: Lossatal, Germ. Status: Offline Points: 2164 |
Post Options
Thanks(0)
|
No your offset should be written/embossed on the inside of the rim - it should be about 55 and will be written as ET55.
If you read the page that I linked to in my first reply you will have a better idea.
|
|
Bollocks to it all!!
51°24′N 12°52′E |
|
arbor-aero
Not Quite Newbie Joined: 10 Oct 12 Location: Wales Status: Offline Points: 37 |
Post Options
Thanks(0)
|
The centre bore I've had seemed out to 1mm over the shaft as for the onset is this the 4jj?
|
|
I'm getting there
|
|
Bromy
Vanorak Joined: 26 Feb 12 Location: Cambridge Status: Offline Points: 1303 |
Post Options
Thanks(0)
|
Check your offset and centre bore
|
|
"follow the masses, do the opposite"
|
|
arbor-aero
Not Quite Newbie Joined: 10 Oct 12 Location: Wales Status: Offline Points: 37 |
Post Options
Thanks(0)
|
The wheels are 16" 205 with 45 tyres.
|
|
I'm getting there
|
|
Bromy
Vanorak Joined: 26 Feb 12 Location: Cambridge Status: Offline Points: 1303 |
Post Options
Thanks(0)
|
Dont buy Cheap adaptors
|
|
"follow the masses, do the opposite"
|
|
rowlesy
Vanorak murdered the murderwagen Joined: 09 Oct 05 Location: up unit! Status: Offline Points: 6466 |
Post Options
Thanks(0)
|
generic adaptors of the ebay chap... what size wheels you got and how wide are they? might alter your offsets ti fit under arches....
|
|
UberFukz broke another! sucky sucky five dollah!
always out numbered never out gunned! RWS welding 07846 380 467 (worcs) |
|
Titus A Duxass
Vanorak Joined: 12 Feb 08 Location: Lossatal, Germ. Status: Offline Points: 2164 |
Post Options
Thanks(0)
|
H & R do.
|
|
Bollocks to it all!!
51°24′N 12°52′E |
|
arbor-aero
Not Quite Newbie Joined: 10 Oct 12 Location: Wales Status: Offline Points: 37 |
Post Options
Thanks(0)
|
Brickwerks do not supply them
|
|
I'm getting there
|
|
Post Reply | Page 12> |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |