Offset |
Post Reply |
Author | |
Stannerz
Not Quite Newbie Joined: 01 Feb 15 Location: Devon Status: Offline Points: 24 |
Post Options
Thanks(0)
Posted: 27 Jun 15 at 10:34 |
Hi with spacers they will clear I am just concerned about wear and handling!
|
|
Bromy
Vanorak Joined: 26 Feb 12 Location: Cambridge Status: Offline Points: 1303 |
Post Options
Thanks(0)
|
my previous wheels were 7j et 35 and they were close to the suspension but just cleared!
|
|
"follow the masses, do the opposite"
|
|
rowlesy
Vanorak murdered the murderwagen Joined: 09 Oct 05 Location: up unit! Status: Offline Points: 6466 |
Post Options
Thanks(0)
|
are you sure the et on the wheels are right? unless there like 10 inches wide they should fit?
|
|
UberFukz broke another! sucky sucky five dollah!
always out numbered never out gunned! RWS welding 07846 380 467 (worcs) |
|
bobby-gg
Groupie Joined: 22 Jan 13 Location: Northumberland Status: Offline Points: 102 |
Post Options
Thanks(0)
|
I'm running 16 x 7.5 et41 Merc alloys, I've had to use 15mm of spacers and longer studs, I think you'd get away with 10mm of spacers with your et35
|
|
Stannerz
Not Quite Newbie Joined: 01 Feb 15 Location: Devon Status: Offline Points: 24 |
Post Options
Thanks(0)
|
Hi
I cant they foul the front suspension arm without spacers! |
|
jason k
Admin Group twinklerims Joined: 14 Jan 05 Location: Wales Status: Offline Points: 15934 |
Post Options
Thanks(0)
|
Try them without the spacer first
|
|
Bcs shallowest surf award winner 2006
camperjam 2011 chug and tug team member aberdare. south wales newest member of karmann korner no longer the only moderator to manage to ban himself |
|
Stannerz
Not Quite Newbie Joined: 01 Feb 15 Location: Devon Status: Offline Points: 24 |
Post Options
Thanks(0)
|
Hi
They are 7.5 x15 et 35 but will be ET 20 with the spacers |
|
Zebedee
Vanorak Joined: 08 Jan 09 Location: Maryport Status: Offline Points: 1121 |
Post Options
Thanks(0)
|
What width are they?
Oettinger and Projektzwo both offered Ronal R9s in 7" width with a 23mm offset and 8" with 11mm offset both with TUV. |
|
|
|
Stannerz
Not Quite Newbie Joined: 01 Feb 15 Location: Devon Status: Offline Points: 24 |
Post Options
Thanks(0)
|
Thanks fellas
will fit them and see how they run.! |
|
rowlesy
Vanorak murdered the murderwagen Joined: 09 Oct 05 Location: up unit! Status: Offline Points: 6466 |
Post Options
Thanks(0)
|
if you mean you need to fit 15mm spacers to fit them which in turn will make the new et of 20 then you are moving the wheels further out of the bus - if they fit under the arches theres one problem sorted but you will shift the load to the outside of the centre of the hub which eventually wear out your bearings prematurely
|
|
UberFukz broke another! sucky sucky five dollah!
always out numbered never out gunned! RWS welding 07846 380 467 (worcs) |
|
boxer998
Not Quite Newbie Joined: 06 Jul 12 Location: Wirral Status: Offline Points: 23 |
Post Options
Thanks(0)
|
I'm running 25mm and 215s I wouldn't recommend it without power steering. No idea on wear yet although after about 3K they look fine.
|
|
Stannerz
Not Quite Newbie Joined: 01 Feb 15 Location: Devon Status: Offline Points: 24 |
Post Options
Thanks(0)
|
Hi all,
Have had a set of wheels sent over from Budapest!! Ronals nice wheels I was assured they would fit straight on as they were pictured on a T3 I went ahead Problem is the offset is 35 fine if they bolt straight on but they will need 15mm spacers bringing the offset to 20! is this to extreme from the point of view of handling, Tyre/bearing wear? Anyone running similar? can I put up with them? Thanks |
|
Post Reply | |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |