engine timing marks? |
Post Reply |
Author | |
MADMATT
Vanorak twin turbo taff Joined: 20 Apr 05 Location: Wales Status: Offline Points: 1245 |
Post Options
Thanks(0)
Posted: 14 Mar 11 at 08:11 |
its worth checking all the followers when out look for hairline cracks.if the followers let go it will make a right mess. bar in pulley will get the timing in the ballpark but need a dti to set 100%.
Edited by MADMATT - 14 Mar 11 at 08:13 |
|
shifty
Groupie Joined: 23 Feb 10 Location: Derby Status: Offline Points: 130 |
Post Options
Thanks(0)
|
hi ran the van again to day really loud tapping noise and sounded to be running on three cylinders so pulled the head off expecting to find bent valves. with the head upside down filled round the valves with engine cleaner to try and find the culprit all the valves hold fluid ie no leakage after cleaning head off with gunk and starting to rebuild fond that one of the hydraulic cam followers sits 4-5 mm lower than all the rest so now thinking that could be the rattling noise? pump timing was only sett to original setting ie piece off bar through pulley into the block thanks madmatt for your help
|
|
ITS ALL FUN AND GAMES TILL SOMEONE GETS HURT THEN ITS HILARIOUS
|
|
MADMATT
Vanorak twin turbo taff Joined: 20 Apr 05 Location: Wales Status: Offline Points: 1245 |
Post Options
Thanks(0)
|
what have you set the pump timing at?
|
|
shifty
Groupie Joined: 23 Feb 10 Location: Derby Status: Offline Points: 130 |
Post Options
Thanks(0)
|
van was only idling on the road when she stopped new pulley and bolts from vw and its running again but seems to sound a lot louder than before
|
|
ITS ALL FUN AND GAMES TILL SOMEONE GETS HURT THEN ITS HILARIOUS
|
|
MADMATT
Vanorak twin turbo taff Joined: 20 Apr 05 Location: Wales Status: Offline Points: 1245 |
Post Options
Thanks(0)
|
what sort of shape is the end of the crank if normally gets chewed when the sprocket comes lose if its not flat on the end an the sprocket a nice fit the pulley wobbels as per aaz.
|
|
shifty
Groupie Joined: 23 Feb 10 Location: Derby Status: Offline Points: 130 |
Post Options
Thanks(0)
|
blimey thought the valves might be bent but wasnt expecting the crank to be shot as well ?
|
|
ITS ALL FUN AND GAMES TILL SOMEONE GETS HURT THEN ITS HILARIOUS
|
|
MADMATT
Vanorak twin turbo taff Joined: 20 Apr 05 Location: Wales Status: Offline Points: 1245 |
Post Options
Thanks(0)
|
crank normally buggerd as well the 19mm bolt should always be changed after removal an toqued 90 mn + 90 deg's
|
|
shifty
Groupie Joined: 23 Feb 10 Location: Derby Status: Offline Points: 130 |
Post Options
Thanks(0)
|
after much trial and error got the van running again tdc mark on flywheel piece of steel to lock camshaft piece of bar through smaller hole in pump pulley turned over by hand a couple of turns then turned the key yes she runs NO she stopped culprit woodruff key sheared on bottom pulley BUGGER
|
|
ITS ALL FUN AND GAMES TILL SOMEONE GETS HURT THEN ITS HILARIOUS
|
|
shifty
Groupie Joined: 23 Feb 10 Location: Derby Status: Offline Points: 130 |
Post Options
Thanks(0)
|
hi madmatt yeah took out the 19 mm bolt as couldnt move 4 allen bolts
|
|
ITS ALL FUN AND GAMES TILL SOMEONE GETS HURT THEN ITS HILARIOUS
|
|
MADMATT
Vanorak twin turbo taff Joined: 20 Apr 05 Location: Wales Status: Offline Points: 1245 |
Post Options
Thanks(0)
|
have you removed the 19mm bi bolt on the end of the crank or just the4 6mm cap heads?
|
|
shifty
Groupie Joined: 23 Feb 10 Location: Derby Status: Offline Points: 130 |
Post Options
Thanks(0)
|
afternoon all please can anyone help with engine timing marks / settings on a 1.9 non turbo just replaced my water pump but pulled the bottom pulley off now engine will only turn over a small amount before it locks up so im thinking ive got to reset crank/cam and pump any ideas most welcome
|
|
ITS ALL FUN AND GAMES TILL SOMEONE GETS HURT THEN ITS HILARIOUS
|
|
Post Reply | |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |