85 panel van rover V8 + lpg

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

 1985 T3 panel van, with a 3.5 ltr rover sd1 v8 fitted, for anyone who has looked into this conversion, you will know that the adapter plate and related parts are the expensive bits, thats why i bought this one complete! This conversion uses a purpose made ally bell housing, so i would presume it has the rover clutch, and still uses the rover starter alongside the block where it should be, the motor also has an lpg conversion fitted with a large tank inside the van, est capacity of around 160 ltrs. Fitted with a 4 speed box.
 The van itself is a very straight van, i can't see any welding needed underneath, needs a patch under the windscreen rubber on the drivers side, and the lower front panel patching or replacing, step panels could be done, but would propably pass a test. Most of the brake pipes have been replaced by the previous owner, as have the flexi's, needs a fuel line running from tank to fuel pump,and filler neck replacing.
 I bought the van for the motor and box, but need to move it on, as too many projects, might keep the audi rims, but have some merc alloys to take there place,
 Van owes me £1650,open to sencible offers, just outside cambridge, m11 junction 10