doka demountable build |
Post Reply | Page <1 678910 13> |
Author | |
rowlesy
Vanorak murdered the murderwagen Joined: 09 Oct 05 Location: up unit! Status: Offline Points: 6466 |
Post Options
Thanks(0)
|
|
|
UberFukz broke another! sucky sucky five dollah!
always out numbered never out gunned! RWS welding 07846 380 467 (worcs) |
|
rowlesy
Vanorak murdered the murderwagen Joined: 09 Oct 05 Location: up unit! Status: Offline Points: 6466 |
Post Options
Thanks(0)
|
more done today! coming along nicely............
started cutting for me new windows
then relocate some of the steels
then make yourself a nice window appeture! and put an upright behind it!
measured up for the front and welded in two more up rights and cut out the middle one
then get up on top and fanny about with the skylight! moved it about abit! up front,at the back and sideways on? but decided on near the back mainly due to where i cut the roof sheeting as it aint long enough! lots of mastic there then!
welded in a few roof bars to support the (yes you've guessed it) the roof! bit of painting tommorrow and make a start on the flooring!
|
|
UberFukz broke another! sucky sucky five dollah!
always out numbered never out gunned! RWS welding 07846 380 467 (worcs) |
|
mr_clarkson
Groupie Joined: 10 Jun 09 Location: denbigh,n.wales Status: Offline Points: 105 |
Post Options
Thanks(0)
|
looking good, cant wait to see it getting sheeted and windows in.
keep it up :)
|
|
..lee..
Vanorak Joined: 14 May 08 Location: llanelli swales Status: Offline Points: 1420 |
Post Options
Thanks(0)
|
fair play that hell of a project ...
|
|
T3ADICT
Vanorak Joined: 21 Jul 05 Location: LeightonBuzzard Status: Offline Points: 4215 |
Post Options
Thanks(0)
|
is my dads scanner is working then i will scan in a pic of a Hohn Road Ranger.
i knew i saw a pic of a crew cab demountable in one of the old Volkswagen Audi Car mage ive got..
there is a pic of a Tischer too.
|
|
WHY T3's.... because they are just so adictive, and having one just aint enough
|
|
rowlesy
Vanorak murdered the murderwagen Joined: 09 Oct 05 Location: up unit! Status: Offline Points: 6466 |
Post Options
Thanks(0)
|
floors down (kind of) need some longer bolts as i was gunna put 12mm ply down but the the caravan thing happened!
hatch to gain access to the engine if need be! so i dont ave to take the back off if the worst happens!
then threw all the seating stuff in the back to see how the land lies.
going to scrap the seat boxes and make some new-uns but nick a few bits of the old ones. ive got about a foot between the seats which isnt enough!
so cut the seat foam so the mother in law can re-cover em!
painted me bare metal and just want one more bar in the roof for support and the welding is pretty much done
get some lumber next week and make a start on the inside!
|
|
UberFukz broke another! sucky sucky five dollah!
always out numbered never out gunned! RWS welding 07846 380 467 (worcs) |
|
Fingle
Yardie Joined: 02 Jul 08 Location: London Status: Offline Points: 270 |
Post Options
Thanks(0)
|
This is deffo my most clicked on thread, I get all excited when theres new pics on it
My hat goes off to you Sir, certainly not a small undertaking. Cant wait to see it finished Edited by Fingle - 15 Feb 10 at 16:39 |
|
FINGLE™
|
|
Joker_Club
Vanorak Joined: 14 Sep 06 Location: Sunny Lancs Status: Offline Points: 3733 |
Post Options
Thanks(0)
|
Loadsa good work there mate One thing, I`d be thinking that the window / skylight isn`t going to be very water-tight, those windows are only really going to seal properly when they hang vertically. Seal on a sunroof is a lot more elaborate to keep the water out, as is the clamping system.
Would you say that if anyone is going to do one of these, then maybe get a caravan sorted first and design round the sizes of the parts / windows etc you`ll re-use?
|
|
Sunny Lancs
|
|
rowlesy
Vanorak murdered the murderwagen Joined: 09 Oct 05 Location: up unit! Status: Offline Points: 6466 |
Post Options
Thanks(0)
|
well ive gotta try the window out as i just aint got enough ali could be good or it might leak like a sieve!
fingle- hope youre liking!
|
|
UberFukz broke another! sucky sucky five dollah!
always out numbered never out gunned! RWS welding 07846 380 467 (worcs) |
|
Joker_Club
Vanorak Joined: 14 Sep 06 Location: Sunny Lancs Status: Offline Points: 3733 |
Post Options
Thanks(0)
|
Can you mock it up using the original caravan side-panel the window came out of? Maybe set it up flat on some trestles, build a "wall" round the panel edge (plasticene or similar) and fill the "moat" with water covering the window and see if the seal holds? Be a shame to have to re-do the roof panel afterwards once the thing is built I`d personally be looking at caravan type roof-lights (Fiamma do some good kits, also with electric vent fans in `em) that fit over a raised lip, or even one of those Heki roof lights, which work the same way, the raised lip is the thing to keep out the watter
|
|
Sunny Lancs
|
|
rowlesy
Vanorak murdered the murderwagen Joined: 09 Oct 05 Location: up unit! Status: Offline Points: 6466 |
Post Options
Thanks(0)
|
its just the price on the sky lights! big-uns aint cheap!!!! ive got all the seals and lots of mastic!
|
|
UberFukz broke another! sucky sucky five dollah!
always out numbered never out gunned! RWS welding 07846 380 467 (worcs) |
|
rowlesy
Vanorak murdered the murderwagen Joined: 09 Oct 05 Location: up unit! Status: Offline Points: 6466 |
Post Options
Thanks(0)
|
got wood!
started off this morn by doing this.......
but whats it for??????
well it saves climbing over the back of me bus!
then made a start on me seat boxes
thats one side done! should be able to get the otherside done tommorrow?
|
|
UberFukz broke another! sucky sucky five dollah!
always out numbered never out gunned! RWS welding 07846 380 467 (worcs) |
|
jason k
Admin Group twinklerims Joined: 14 Jan 05 Location: Wales Status: Offline Points: 15934 |
Post Options
Thanks(0)
|
great work!!!
|
|
Bcs shallowest surf award winner 2006
camperjam 2011 chug and tug team member aberdare. south wales newest member of karmann korner no longer the only moderator to manage to ban himself |
|
johny b
Groupie Joined: 24 Apr 05 Location: Malpas,Cheshire Status: Offline Points: 197 |
Post Options
Thanks(0)
|
looking good
|
|
rowlesy
Vanorak murdered the murderwagen Joined: 09 Oct 05 Location: up unit! Status: Offline Points: 6466 |
Post Options
Thanks(0)
|
cheers fellas!
done the other side to match - doesnt help but makes life easier!
fitted slats to hold table when its dropped for "sleep mode"
fitted side window surrounds and had a mooch up top!
and a close up of the huuuuuge skylite! be good if it works but if not i'll make a viewing port or summat!
then proceeded to play on quad bike for half hour then broke it again! pile o shite!
|
|
UberFukz broke another! sucky sucky five dollah!
always out numbered never out gunned! RWS welding 07846 380 467 (worcs) |
|
kooldubs
Vanorak I'M STILL HERE! Joined: 09 May 07 Location: Plymouth... Status: Offline Points: 4713 |
Post Options
Thanks(0)
|
keep em coming ...brilliant work so far...your an insperation
|
|
86 t3 doka & 2001 T4 2.5 TDI
07752280999... |
|
mr_clarkson
Groupie Joined: 10 Jun 09 Location: denbigh,n.wales Status: Offline Points: 105 |
Post Options
Thanks(0)
|
great work, looking really good now, cant wait to see it gettimng sheeted!
out of curiosity, why is there an overhang on the seats nearest the tailgate? just wondered as it looks like you are loosing storage space?
cheers
jon
|
|
DavidPallister
Yardie Joined: 03 May 08 Location: Bridgend Status: Offline Points: 446 |
Post Options
Thanks(0)
|
Engine access hatch
|
|
kooldubs
Vanorak I'M STILL HERE! Joined: 09 May 07 Location: Plymouth... Status: Offline Points: 4713 |
Post Options
Thanks(0)
|
take a look chap....
|
|
86 t3 doka & 2001 T4 2.5 TDI
07752280999... |
|
rowlesy
Vanorak murdered the murderwagen Joined: 09 Oct 05 Location: up unit! Status: Offline Points: 6466 |
Post Options
Thanks(0)
|
aye lads! engine covers there so i dont have to take the whole back off if i break down! thinking of looking at sheeting this weekend to see how much ive got and how much more i need! should be fun!
|
|
UberFukz broke another! sucky sucky five dollah!
always out numbered never out gunned! RWS welding 07846 380 467 (worcs) |
|
Post Reply | Page <1 678910 13> |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |