egr block yes or no ? |
Post Reply | Page <1 234 |
Author | |
Onefut
Yardie I like pink Joined: 14 Jan 08 Location: North Devon Status: Offline Points: 994 |
Post Options
Thanks(0)
|
True
I suppose i cud gotta find the damn thing first cudnt see anything like wot i know as a EGR when i looked the other day |
|
God whispers in our soul & speaks to our heart. When we don't have time to listen, He has to throw a brick.
It's our choice: Listen to the whisper or wait for the brick! 05 Shuttle SE 174 Auto LWB |
|
Berisford
Vanorak Joined: 05 Nov 05 Location: Nottingham Status: Offline Points: 1849 |
Post Options
Thanks(0)
|
The bit I blank off is below and just to the left of the oil filler spout.
Shiney bit of pipe comes from a flexi joint and connects to a bigger dark pipe.
2 x 10mm bolts to remove a brace and 2 x 13mm to disconnect the pipe.
Edited by Berisford - 10 Mar 09 at 18:12 |
|
Senate Square, Helsinki, 12 June 1993.
|
|
sti 360
Groupie Joined: 16 Dec 08 Location: bath Status: Offline Points: 40 |
Post Options
Thanks(0)
|
ive done it ,seems to start better in the morning
|
|
Onefut
Yardie I like pink Joined: 14 Jan 08 Location: North Devon Status: Offline Points: 994 |
Post Options
Thanks(0)
|
ill have a look in next few days an see wot i can do
|
|
God whispers in our soul & speaks to our heart. When we don't have time to listen, He has to throw a brick.
It's our choice: Listen to the whisper or wait for the brick! 05 Shuttle SE 174 Auto LWB |
|
triple
Yardie Joined: 14 Aug 08 Location: worcestershire Status: Offline Points: 645 |
Post Options
Thanks(0)
|
Onefut, if you block off your egr, how about posting some pics so we can see how its done, we know how detailed your HOW-TO,S are.
|
|
Onefut
Yardie I like pink Joined: 14 Jan 08 Location: North Devon Status: Offline Points: 994 |
Post Options
Thanks(0)
|
nay probs mate
got fotos ready for a door strip how to as soon as i get the chance to post |
|
God whispers in our soul & speaks to our heart. When we don't have time to listen, He has to throw a brick.
It's our choice: Listen to the whisper or wait for the brick! 05 Shuttle SE 174 Auto LWB |
|
mydogisbald
Groupie Joined: 15 Apr 08 Location: Scotland Status: Offline Points: 111 |
Post Options
Thanks(0)
|
Just thought I post my findings. I have a BNZ coded engine. It is not the same lay out as the pictures in the 'How To'. The blanking plate was put in where the upper yellow circle is in this picture;
The lower circle shows the other end of the pipe but is trickier to get to. Fitting is a breeze, just undo 2 star drive bolts. I took it for a test and within half a mile the EML came on, flashing intermittently. I took the blanking plate off and the EML disappeared. The plate was sooty when it was removed, even after that short blast. To be honest I didn't feel any difference in performance or anything else whilst the plate was in but as said I only had it in for a short distance. Getting it remapped tomorrow anyway so I'll just have to settle for that instead. MDIB |
|
wiganlatic
Groupie Joined: 28 Dec 09 Location: Wigan Status: Offline Points: 117 |
Post Options
Thanks(0)
|
to quote Touche
"to block off you can use a pucker egr delete or even easier is stick a suitably tight fitting ball bearing up the vacuum pipe and refit, or even an old bolt." No need for fancy plates, just block the pipe. |
|
CLONKY
Yardie Joined: 23 Jan 06 Status: Offline Points: 828 |
Post Options
Thanks(0)
|
Same guy reckons it gives a 7 mpg improvement as well.... The valve still needs to operate when the engine is turned off.It shuts off the air supply so that the engine comes to rest smoothly
|
|
Tim the gas
Yardie Joined: 05 Dec 09 Location: Surrey Status: Offline Points: 262 |
Post Options
Thanks(0)
|
I got my EGR delete kit ( blanking plate and gasket ) from Brickwerks this week.
I'm gonna fit a new K&N air filter and fit the blank-off this week. I'm a bit confused now whether the plate will fit my AXE 2.5 engine now. Only one way to find out- jump in with the spanners. 50/50 chance I suppose. I've located it on the top of the engine and it looks a cinch to do the job. Looking forward to finding out what the difference is. No more sooty shitty deposits going back into my air intake tract. I'll let you guys know what I think of the mod after I've had a chance to drive it around for a few days. |
|
2004 T30 174-AXE- CELTIC MAPPED TO 228 BHP - LWB TORNADO RED PANEL VAN
|
|
shadowmaker
Groupie Joined: 20 Dec 08 Location: FINLAND Status: Offline Points: 60 |
Post Options
Thanks(0)
|
Just stay with the original paper filter. Otherwise you end up having shitty deposits into your intake tract once again. Although this time they aren't sooty unless you drive behind a diesel... |
|
VW T4 2.5TDI 370hp, 750Nm http://www.youtube.com/watch?v=hkSTslJf7Z4
|
|
wiganlatic
Groupie Joined: 28 Dec 09 Location: Wigan Status: Offline Points: 117 |
Post Options
Thanks(0)
|
Is that all the needle in the valve is used for Clonky? - the smooth stop?
I blocked off my Vacuum tube to the EGR and I haven't noticed any difference to the stop. Have I just been lucky? |
|
CLONKY
Yardie Joined: 23 Jan 06 Status: Offline Points: 828 |
Post Options
Thanks(0)
|
Before i blanked mine off i wedged the flap fully open with cable ties. When the engine was turned off,especially when well hot after a run, as it came to rest there was a sort of rattling noise,like transmission gears jangling.
When the flap is operational it shuts off the air supply to the engine as its turned off, and you dont get the noise.
|
|
downhiller
Groupie Joined: 12 Oct 08 Location: Cardiff Status: Offline Points: 222 |
Post Options
Thanks(0)
|
Anyone have more to say on what clonky posted?
I was thinking of fitting this: Is that a bad idea, as it won't contain the valve that clonky's talking about?
|
|
Bog-standard poverty-spec 174ps T5 panel van (black, LWB)
|
|
Happy Yellow
Yardie Joined: 15 Feb 07 Location: Latvia Status: Offline Points: 263 |
Post Options
Thanks(0)
|
I posted this on another thread here:
I blanked my EGR system, and thought that it was saving fuel. I could not be 100% sure until I gave it a proper test. Now I have.
Every so often I drive from Riga, Latvia to Bergerac, France. It's 2900 km door-to-door. I compared this year's fuel consumption figures with last year's (also in August):
2009 Day 1: 8.9 (89 km/h)
2010 Day 1: 7.5 (87 km/h)
2009 Day 2: 8.9 (104 km/h)
2010 Day 2: 7.8 (100 km/h)
2009 Day 3: 9.3 (85 km/h)
2010 Day 3: 8.2 (81 km/h)
2009 average: 9.0 (92.6 km/h) in English: 31.39 mpg (57.54 mph)
2010 average: 7.8 (89.3 km/h) in English: 36.48 mpg (55.49 mph)
Yes, my average speed was down a little, and I can confirm that I drove for 55 minutes longer in 2010 than I did in 2009 (30:50 v 31:45), but that slower average cannot account for all that saved fuel. Can it? I saved about 13% or 36 litres or €40! That's 3 reasonable French meals!
Note: I've quoted fuel consumption in litres per 100 km as that's how my vehicle works; how I think, and it's esier once you get your head around it.
I've treated each day as equal so as to make calculation more simple. In fact:
Day 1: 1060 km Soviet Union: quiet roads with low speed limits and too many police.
Day 2: 1003 km Germany: all Autobhan.
Day 3: 800 km France: N roads only, no Autoroute.
Actual total: 2863 km
Also, it's nice only having to fill-up 3 times rather than 4.
|
|
2005 Sari Yellow Caravelle 174/AXE 200k miles
|
|
Jason Statham
Groupie Joined: 09 Jul 10 Location: Swindon Status: Offline Points: 45 |
Post Options
Thanks(0)
|
I have 3 foot operated controls under my dashboard. The right one looks like a pedal but must be treated like a 2 position switch.On or off don't confuse the matter by treating it like a variable affair!
Edited by Jason Statham - 07 Nov 10 at 20:22 |
|
If it's got tits or wheels it's gonna give ya grief..... if it has both it'll be the death of ya!
|
|
Jason Statham
Groupie Joined: 09 Jul 10 Location: Swindon Status: Offline Points: 45 |
Post Options
Thanks(0)
|
Hi again folks, is there any way that clean air can also go back down the nickle coated pipe down to the exhaust under big boost, thus losing boost pressure? I have just knocked up a blanking plate out of alloy in the workshop and I think it has definitely improved the whole job! I haven't blanked the Vac pipe cos I understand the theory behind the controlled air shut down and I've heard friends T5s shut down with the sound of a gearbox full of spanners. I haven't tried it in daylight to see if it has reduced my smoke output to that of a small power station.
|
|
If it's got tits or wheels it's gonna give ya grief..... if it has both it'll be the death of ya!
|
|
Post Reply | Page <1 234 |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |