Definitive "What wheels fit" thread |
Post Reply | Page 123 6> |
Author | |
Baxter
Admin Group Scruff Daddy Joined: 29 May 04 Location: Huddersfield Status: Offline Points: 8060 |
Post Options
Thanks(0)
Posted: 10 Mar 05 at 21:03 |
Right, loads of what fits what doesn't questions at the moment. Only reply to this thread if you have fitted alloy wheels and you have the following data.
Plus anything else I forgot! Pictures would be nice. All dross and drivel will be deleted! - Keep it optimum! And - Wheelspecs.com And - Tyresave.co.uk Try using forum search facility using "wheels" and "alloys" too! Edited by Slackdub |
|
Baxter
Admin Group Scruff Daddy Joined: 29 May 04 Location: Huddersfield Status: Offline Points: 8060 |
Post Options
Thanks(0)
|
Porsche Cup 1.
Rear - 9 x 17 Fitted with the use of VW/Audi 17mm headed wheel bolts. Speedo reads true Gearing - A little taller.
Edited by mr brickyard |
|
Baxter
Admin Group Scruff Daddy Joined: 29 May 04 Location: Huddersfield Status: Offline Points: 8060 |
Post Options
Thanks(0)
|
Ronal R8 (16 spoke design) From Audi 200 Turbo. 6 x 15 front and rear.
Edited by mr brickyard |
|
Tee3
Admin Group Coprophagous Cretin Joined: 06 Jun 04 Location: Huddersfield Status: Offline Points: 9763 |
Post Options
Thanks(0)
|
Porsche Cup 1.
Front Edited by mr brickyard |
|
YOU CANT EDUCATE GAMMON http://www.tee3.co.uk/ |
|
higgy
Groupie Joined: 30 Nov 04 Location: Scotland Status: Offline Points: 67 |
Post Options
Thanks(0)
|
Borbet A 18 x8.5 Front and rear no clearance problems with 60mm lower springs rears 255 x 40 straight on with standard bolts fronts 225 x 40 straight on using extended bolts and no spacers
Edited by mr brickyard |
|
tin tops rule ya bass
|
|
Coxy
Not Quite Newbie Joined: 02 Mar 05 Location: Shropshire Status: Offline Points: 21 |
Post Options
Thanks(0)
|
Ok, here's Dave Single cab with 20" Antera rims. 7.5j on the front 10j on the back with 30mm lowered springs. Edited by mr brickyard |
|
https://www.facebook.com/cevlautomotive/
|
|
Curved screen p
Newbie Joined: 12 Mar 05 Location: United Kingdom Status: Offline Points: 1 |
Post Options
Thanks(0)
|
17" Mitsubishi rims - modified pcd Front: 225/45/17 tyres Rear: 225/54/17 tyres Sorry, don't know rim widths or offsets, but spacers are used and the van is lowered. If anybody needs some more information, please contact me. Chris aka CSP Edited by Curved screen p |
|
john.e
Admin Group Techno Bloke Joined: 28 May 04 Location: Pembrokeshire Status: Offline Points: 666 |
Post Options
Thanks(0)
|
Intra A-Line Front - 7 1/2 x 16 Rear - 7 1/2 x 16 Speedo - Reads true Edited by john.e |
|
SteveS
Yardie Joined: 18 Oct 04 Location: North Wales Status: Offline Points: 663 |
Post Options
Thanks(0)
|
16" Mercedes ML Alloys. Tyre size 225 75 16. ET sorry don't know.
Edited by mr brickyard |
|
Full Service, LPG conversions, Security and Camper Accessories. |
|
wedgedout
Yardie Joined: 05 Jan 05 Status: Offline Points: 321 |
Post Options
Thanks(0)
|
|
|
Dave Dorson
07811 050 074 david dot dorson at gmail dot com :) |
|
orcecaveman
Vanorak Joined: 04 Jun 04 Location: Andalucia Status: Offline Points: 1292256 |
Post Options
Thanks(0)
|
Finnished painting these puppy's today, (Momo Arrows).looks like all I need is lomger studs and 5mm spacers on the front, but ill put 10mm all round. crap picture, muchos wont let me upload a higher resolution, whats a beeter image upload prog to use? Edited by SAPPERMAN |
|
|
|
ratbus
Vanorak Joined: 29 Jun 04 Location: United Kingdom Status: Offline Points: 1048 |
Post Options
Thanks(0)
|
16" PENTA (Merc) Front: 8x16 Bolt holes drilled to 14mm and radiused seat T4 Bolts 6mm spacers (from machine7) ET? 225/50/16 tyres Lowered 60mm Clearance issues: Brake calipers foul wheel without spacers and trye hits arch when the suspension bottoms out! speedo is slightly out (225/55/16 tyres would sort it) Rear: 8x16 Bolt holes drilled to 14mm and radius seat LT35 studs 10mm spacers (from machine7) ET? 225/55/16 tyres Lowered 60mm No clearance issues but the slider does hit the tyre Edited by ratbus |
|
nativeboards.com
This weeks bumper sticker: If it swells- ride it __________________ I have two signatures! |
|
westywagen
Newbie Joined: 26 Feb 05 Status: Offline Points: 19 |
Post Options
Thanks(0)
|
Porsche teledials
new_wheels.jpg"> front 6 x 15 ET 52.2 195/70 x 15 tyres 25 mm alloy adapters (from Machine7) no clearance problems - std height suspension (at the moment) rear 7 x 15 ET 23.3 195/70 x 15 25 mm alloy adapters (from Machine7) with longer studs than their standard adapters as the wheel offset gives the wheels a deeper centre cross section no clearance problems - std height suspension rear tyre wall just catches on sliding door - the sidewall of the avon avan tyres sticks out 8mm more than the rim -anti kerbing feature! wheel nuts to suit from Machine7 |
|
brianjbox
Yardie Joined: 11 Jan 05 Location: United Kingdom Status: Offline Points: 141 |
Post Options
Thanks(0)
|
RH Porsche replica's [since found out these are called Turbo-Twist] Front wheels. 8.5"x18" fitted with 225/40x18 tyre's Offset ET 52 Spacers/porsche adapter's 32mm & 25mm bolts. 130mm P.C.D. Back wheels. 10"x18" fitted with 255/40x18 tyre's. Offset ET 54. Spacers/porsche adapter's 32mm & 25mm bolts. 130mm P.C.D. No clearance problems but sliding hinge had to be extended 46mm for door to open. Edited by brianjbox |
|
Steve B
Vanorak Joined: 26 Apr 05 Location: Mong free zone Status: Offline Points: 13190 |
Post Options
Thanks(0)
|
Merc Duchatelet Ronals 7.5X16 with 205x60x16 tyres. ET 35 10mm spacers needed on the front in order to fit the centre caps.
Edited by g60steve |
|
Baxter
Admin Group Scruff Daddy Joined: 29 May 04 Location: Huddersfield Status: Offline Points: 8060 |
Post Options
Thanks(0)
|
Just put some of these on for a customer. Didn't have the camera to take piccies though. 8x18 ET 48 245/45/18's Tyre size is too big for van, customer is buying some smaller tyres for front in due course. XL Conversion studs at front, 20mm spacers and radiused nuts. Went onto pick up so can't tell about side door clearance. Fronts were machined to 66mm, but they needed the 20mm spacers to clear top arm, you could get away with leaving the top part of the hole with a rim on so the centre cap would still fit, if you understand that? The customer had the centre machined to 66m all the way through, but as it happened he didn't need to, he could of got away with a partial bore and left the genuine centre caps in place. Niether of us were o know until it was tried. Looks really cool, I'll get more details soon. Edited by mr brickyard |
|
Steve B
Vanorak Joined: 26 Apr 05 Location: Mong free zone Status: Offline Points: 13190 |
Post Options
Thanks(0)
|
17" x 8" Carat by Duchatelet Diamond Cut Face Ronals fitted with 225x45x17 Y rated Michelin's. Front-XL stud conversion and 10mm spacers. Rear-XL studs and 20mm spacers.
Edited by g60steve |
|
SmnByt
Groupie Joined: 06 Feb 05 Location: United Kingdom Status: Offline Points: 50 |
Post Options
Thanks(0)
|
Audi speedline, from a 1995 Audi A6 Front 7x15 ET 45 205/65/15 20mm spacers 45mm Bolts Centre bore machined to 64mm Rear 7x15 ET 45 20mm spacers +32mm studs Centre bore machined to 57mm Sliding door open without any fouling Edited by SmnByt |
|
Doomed......
|
|
Baxter
Admin Group Scruff Daddy Joined: 29 May 04 Location: Huddersfield Status: Offline Points: 8060 |
Post Options
Thanks(0)
|
Audi A8 wheels. Audi A8 wheels.
|
|
poshbuggers
PROBATION Messer. Joined: 03 Feb 05 Location: United Kingdom Status: Offline Points: 816 |
Post Options
Thanks(0)
|
Porsche Cayenne 'S' 18"x8J
Edited by Mr Brick-Yard |
|
Post Reply | Page 123 6> |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |