Definitive "What wheels fit" thread |
Post Reply | Page <1 456 |
Author | |
ratbus
Vanorak Joined: 29 Jun 04 Location: United Kingdom Status: Offline Points: 1048 |
Post Options
Thanks(0)
|
16" PENTA (Merc) Front: 8x16 Bolt holes drilled to 14mm and radiused seat T4 Bolts 6mm spacers (from machine7) ET? 225/50/16 tyres Lowered 60mm Clearance issues: Brake calipers foul wheel without spacers and trye hits arch when the suspension bottoms out! speedo is slightly out (225/55/16 tyres would sort it) Rear: 8x16 Bolt holes drilled to 14mm and radius seat LT35 studs 10mm spacers (from machine7) ET? 225/55/16 tyres Lowered 60mm No clearance issues but the slider does hit the tyre Edited by ratbus |
|
nativeboards.com
This weeks bumper sticker: If it swells- ride it __________________ I have two signatures! |
|
orcecaveman
Vanorak Joined: 04 Jun 04 Location: Andalucia Status: Offline Points: 1292256 |
Post Options
Thanks(0)
|
Finnished painting these puppy's today, (Momo Arrows).looks like all I need is lomger studs and 5mm spacers on the front, but ill put 10mm all round. crap picture, muchos wont let me upload a higher resolution, whats a beeter image upload prog to use? Edited by SAPPERMAN |
|
|
|
wedgedout
Yardie Joined: 05 Jan 05 Status: Offline Points: 321 |
Post Options
Thanks(0)
|
|
|
Dave Dorson
07811 050 074 david dot dorson at gmail dot com :) |
|
SteveS
Yardie Joined: 18 Oct 04 Location: North Wales Status: Offline Points: 663 |
Post Options
Thanks(0)
|
16" Mercedes ML Alloys. Tyre size 225 75 16. ET sorry don't know.
Edited by mr brickyard |
|
Full Service, LPG conversions, Security and Camper Accessories. |
|
john.e
Admin Group Techno Bloke Joined: 28 May 04 Location: Pembrokeshire Status: Offline Points: 666 |
Post Options
Thanks(0)
|
Intra A-Line Front - 7 1/2 x 16 Rear - 7 1/2 x 16 Speedo - Reads true Edited by john.e |
|
Curved screen p
Newbie Joined: 12 Mar 05 Location: United Kingdom Status: Offline Points: 1 |
Post Options
Thanks(0)
|
17" Mitsubishi rims - modified pcd Front: 225/45/17 tyres Rear: 225/54/17 tyres Sorry, don't know rim widths or offsets, but spacers are used and the van is lowered. If anybody needs some more information, please contact me. Chris aka CSP Edited by Curved screen p |
|
Coxy
Not Quite Newbie Joined: 02 Mar 05 Location: Shropshire Status: Offline Points: 21 |
Post Options
Thanks(0)
|
Ok, here's Dave Single cab with 20" Antera rims. 7.5j on the front 10j on the back with 30mm lowered springs. Edited by mr brickyard |
|
https://www.facebook.com/cevlautomotive/
|
|
higgy
Groupie Joined: 30 Nov 04 Location: Scotland Status: Offline Points: 67 |
Post Options
Thanks(0)
|
Borbet A 18 x8.5 Front and rear no clearance problems with 60mm lower springs rears 255 x 40 straight on with standard bolts fronts 225 x 40 straight on using extended bolts and no spacers
Edited by mr brickyard |
|
tin tops rule ya bass
|
|
Tee3
Admin Group Coprophagous Cretin Joined: 06 Jun 04 Location: Huddersfield Status: Offline Points: 9763 |
Post Options
Thanks(0)
|
Porsche Cup 1.
Front Edited by mr brickyard |
|
YOU CANT EDUCATE GAMMON http://www.tee3.co.uk/ |
|
Baxter
Admin Group Scruff Daddy Joined: 29 May 04 Location: Huddersfield Status: Offline Points: 8060 |
Post Options
Thanks(0)
|
Ronal R8 (16 spoke design) From Audi 200 Turbo. 6 x 15 front and rear.
Edited by mr brickyard |
|
Baxter
Admin Group Scruff Daddy Joined: 29 May 04 Location: Huddersfield Status: Offline Points: 8060 |
Post Options
Thanks(0)
|
Porsche Cup 1.
Rear - 9 x 17 Fitted with the use of VW/Audi 17mm headed wheel bolts. Speedo reads true Gearing - A little taller.
Edited by mr brickyard |
|
Baxter
Admin Group Scruff Daddy Joined: 29 May 04 Location: Huddersfield Status: Offline Points: 8060 |
Post Options
Thanks(0)
|
Right, loads of what fits what doesn't questions at the moment. Only reply to this thread if you have fitted alloy wheels and you have the following data.
Plus anything else I forgot! Pictures would be nice. All dross and drivel will be deleted! - Keep it optimum! And - Wheelspecs.com And - Tyresave.co.uk Try using forum search facility using "wheels" and "alloys" too! Edited by Slackdub |
|
Post Reply | Page <1 456 |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |